A computed tomography (CT) of the abdomen images the region from the thoracic diaphragm to the pelvic groin. The computed tomography technique uses x-rays to differentiate tissues by their different radiation absorption rates.
Oral contrast material can be given to opacify the bowel before scanning. An i.v. injection of a contrast agent (x-ray dye) improves the visualization of organs like liver, spleen, pancreas and kidneys and provides additional information about the blood supply.
Spiral- or helical CT, including improvements in detector technology support faster image acquisition with higher quality. Advanced CT systems can usually obtain a CT scan of the whole abdomen during a single breath hold. This speed increases the detection of small lesions (caused by differences in breathing on consecutive scans) and is beneficial especially in pediatric, elderly or critically-ill patients.
Changes in patient weight require variations in x-ray tube potential to maintain constant detector energy fluence. An increased x-ray tube potential improves the contrast to noise resolution (CNR).

An abdominal CT is typically used to help diagnose the cause of abdominal pain and diseases such as:
Other indications for CT scanning of the abdomen/pelvis include planning radiation treatments, guide biopsies and other minimally invasive procedures. Advanced techniques include for example 3D CT angiography, multiphasic contrast-enhanced imaging, virtual cystoscopy, virtual colonoscopy, CT urography and CT densitometry.

See also Contrast Enhanced Computed Tomography.

Conventional (also called analog, plain-film or projectional) radiography is a fundamental diagnostic imaging tool in the detection and diagnosis of diseases. X-rays reveal differences in tissue structures using attenuation or absorption of x-ray photons by materials with high density (like calcium-rich bones).
Basically, a projection or conventional radiograph shows differences between bones, air and sometimes fat, which makes it particularly useful to asses bone conditions and chest pathologies. Low natural contrast between adjacent structures of similar radiographic density requires the use of contrast media to enhance the contrast.
In conventional radiography, the patient is placed between an x-ray tube and a film or detector, sensitive for x-rays. The choice of film and intensifying screen (which indirectly exposes the film) influence the contrast resolution and spatial resolution. Chemicals are needed to process the film and are often the source of errors and retakes. The result is a fixed image that is difficult to manipulate after radiation exposure. The images may be also visualized on fluoroscopic screens, movies or computer monitors.
X-rays emerge as a diverging conical beam from the focal spot of the x-ray tube. For this reason, the radiographic projection produces a variable degree of distortion. This effect decreases with increased source to object distance relative to the object to film distance, and by using a collimator, which let through parallel x-rays only.
Conventional radiography has the disadvantage of a lower contrast resolution. Compared with computed tomography (CT) and magnetic resonance imaging (MRI), it has the advantage of a higher spatial resolution, is inexpensive, easy to use, and widely available. Conventional radiography can give high quality results if the technique selected is proper and adequate. X-ray systems and radioactive isotopes such as Iridium-192 and Cobalt-60 for generating penetrating radiation, are also used in non-destructive testing.

See also Computed Radiography and Digital Radiography.

The filament is the source of electrons (cathode) in x-ray tubes. A thin wire (0.1- 0.5 mm, usually tungsten) emits electrons due to thermionic emission, operating in a vacuum and energized with electric current.
A CT tube utilizes a larger filament with larger size of the effective focal spot than a conventional x-ray tube.

When invented, a fluoroscopic system consisted of x-ray tube, fluorescent screen and x-ray table. In 1950's, the development of the image intensifier revolutionized fluoroscopes. The basic components are extended by a gantry, image intensifier, camera, film and monitor system. The x-ray tube is usually located under the patient table, in opposition to the image intensifier and film cassette or display unit. The patient table can be rotated to an upright position for certain examinations and can be lowered to horizontal position for other imaging procedures. In some instances, the unit can be operated from outside the room.
Today, the transition from conventional to digital fluoroscopy replaces the image intensifier. A flat-panel detector in combination with sensitive image sensors and digital image processing improves the diagnostic ability of a modern system.

(mA min) The product of the x-ray tube operating current and the exposure time in minutes.

See Milliampere and X-Ray Tube.