Tomography is imaging by sections or sectioning to obtain images of slices through objects like the human body. Tomography is derived from the Greek words 'to cut or section' (tomos) and 'to write' (graphein). A device used in tomography is called a tomograph, while the image produced is a tomogram.
The first medical applications utilized x-rays for images of tissues based on their x-ray attenuation coefficient. The mathematical basis for tomographic imaging was laid down by Johann Radon. This type of imaging is used in different medical applications as for example computed tomography, ultrasound imaging, positron emission tomography and magnetic resonance imaging (MRI) also called magnetic resonance tomography (MRT).
Conventional x-ray tomographic techniques show organ structures lying in a predetermined plane (the focal plane), while blurring the tissue structures in planes above and below by linear or complex geometrical motion of the x-ray tube and film cassette.
Basically, computed tomography is the reconstruction of an image from its projections. In the strict sense of the word, a projection at a given angle is the integral of the image in the direction specified by that angle. The CT images (slices) are created in the axial plane, while coronal and sagittal images can be rendered by computer reconstruction.

See also Zonography, Computed or Computerized Axial Tomography, Resolution Element, Radiographic Noise, Intravenous Pyelogram.

Barium sulfate (BaSO4) is an inert and insoluble white powder with high density. Barium belongs chemically to the group of heavy metals. Mixed with water and additional ingredients (e.g., sweetening agents), barium sulfate is the preferred positive contrast agent for abdominal x-ray and computed tomography examinations. The extremely low solubility of barium sulfate protects patients from absorbing harmful amounts of the metal (water soluble metal compounds are often highly toxic). The high density in x-ray examinations is related to the high atomic number, since large nuclei absorb x-rays much better than smaller nuclei.
Barium sulfate agents for opacification of the gastrointestinal tract are not absorbed or metabolized and are resistant to dilution. These contrast agents are opaque white suspensions and usually swallowed or administered as an enema. They provide better delineation of mucosal details and are less expensive than water-soluble iodinated contrast media. The elimination rate is a function of gastrointestinal transit time. After GI application, it leaves the body with the feces.

Contraindications of barium sulfate products in case of known or suspected:

A cassette is a thin, low x-ray absorption plastic case, for holding the x-ray film. Inside the cassette are intensifying screens for the conversion of x-rays to visible light photons. The intensifying screens are mounted in close contact with the film. Mammography cassettes are equipped with single screens.

Contrast is the relative difference of intensities in two adjacent regions of an image. When referring to computed tomography (CT), contrast is defined as a difference in Hounsfield units between structures. The measurement of contrast resolution in CT imaging involves determining how easy it is to differentiate tissues whose CT density is similar to that of their surroundings. An image lacks contrast when there are no sharp differences between black and white. Brightness refers to the overall lightness or darkness of an image.
The contrast between air, soft tissue, and bones in x-ray and CT images is based on their different absorption of x-rays. Differences in tissue density, thickness and changes of the x-ray spectrum have consequences for image contrast, image noise as well as patient dose.
Optimized tube current, collimation, pitch and image reconstruction improves the contrast. Higher image contrast is produced by increased slice thickness, smaller matrix, and large field of view which results in large voxel size; high mAs to reduce noise; low pass filter.

See also Contrast Enhanced Computed Tomography.

Different filter types are used in medical imaging to improve image quality.
Filter materials such as aluminum, iron or copper, located in the primary x-ray beam between tube and collimator, filter out lower energetic x-rays (for example bow-tie filter). Filters partially absorb or attenuate the x-ray beam to prevent radiation overexposure. The sum of filtration consists of inherent and added filters. This filtration affects the beam energy and ability to penetrate materials.
Mathematical filter procedures are used for the convolution of the attenuation profiles and reconstruction of computed tomography (CT) images.