If available, some graphic aids can be helpful to show image orientations.
1) A graphic icon of the labeled primary axes (A, L, H) with relative lengths given by direction sines and system of coordinates as if viewed from the normal to the image plane can help orient the viewer, both to identify image plane orientation and to indicate possible in plane rotation.
2) In graphic prescription of obliques from other images, a sample original image with an overlaid line or set of lines indicating the intersection of the original and oblique image planes can help orient the viewer. The location in the R/L and P/A directions can be specified relative to the axis of the scanner.
The F/H location can be specified relative to a convenient patient structure.
The orientation of single oblique slices can be specified by rotating a slice in one of the basic orientations toward one of the other two basic orthogonal planes about an axis defined by the intersection of the 2 planes.
Double oblique slices can be specified as the result of tipping a single oblique plane toward the remaining basic orientation plane, about an axis defined by the intersection of the oblique plane and the remaining basic plane. In double oblique angulations, the first rotation is chosen about the vertical image axis and the second about the (new) horizontal axis. Angles are chosen to have magnitudes less than 90° (for single oblique slices less than 45°); the sign of the angle is taken to be positive when the rotation brings positive axes closer together.

A photon is a discrete packet of electromagnetic energy. The amount of energy depends on the frequency (wavelength) of the photon. Highest frequency, most energetic photon radiations are gamma rays, up to 300 EHz - 1.24 MeV. In addition to energy, photons are also carrying momentum.
Photons have no electrical charge or rest mass and exhibit both particle and wave behavior.
Photons are traveling in vacuum (without interactions with matter) with the constant velocity of 2.9979 x 10⁸ m/s (c, speed of light).
Photons get absorbed or scattered away from their original direction of travel when interacting with matter.
High energy photons as for example x-rays cause damages to exposed tissue and cells. Radiation exposure is measured in roentgen, radiation absorption in Roentgen//min.
Photon radiation in the frequency ranges of x-rays and gamma rays are used for medical diagnostic and treatment.

See also Photon Energy and Gamma Ray.

Radiation safety concerns the safe use of ionizing radiation. The radiation exposure has to be controlled to protect people and the environment from unnecessary exposure and the damaging effect to the health. Legal regulations require that radiation exposure (individual radiation exposure as well as collective dose) must be kept as low as reasonably achievable.
The electromagnetic spectrum includes x-rays, gamma rays, ultraviolet radiation, visible light, infrared radiation, and radio waves. Additionally, there are several types of particulate radiation e.g., alpha and beta particles. All types of radiation are used in a wide range of medicine, industry, research and communication. Radiation risks can occur due to either long-term low level exposure or short-term high level exposure. A well-functioning dosimetry program is essential for a safe use and for compliance with federal and state regulations.

Three basic rules have to be observed for a safe use of ionizing radiation.

See also Inverse Square Law, Administrative Dose Guidelines and Annual Dose Limit.

(RF) Radio frequency refers to that portion of the electromagnetic spectrum in which electromagnetic waves can be generated by alternating current fed to an antenna.

Radiographic contrast media (RCM) contributes important information to the diagnostic process. Actual contrast agents are safe drugs. Adverse reactions are rare, the incidence and severity of side effects decrease with the use of nonionic and low-osmolar contrast media. Adverse reactions are diverse, ranging from mild physiological disturbances to very rare life-threatening anaphylactic or anaphylactoid reactions. Users of contrast agents must be aware of the risk factors and be prepared to promptly manage adverse effects.
Side effects that may occur with intravascular administration of contrast agents are also possible after administration by other paths. Increased risk to an adverse reaction includes patients with a history of a previous reaction to a contrast medium, a known sensitivity to iodine, or a known clinical hypersensitivity (bronchial asthma, hay fever, and food allergies).

See also Contrast-Induced Nephropathy, Iodide-Induced Hyperthyroidism and Idiosyncratic Reactions.