(CA) Contrast agents are used to change the imaging characteristics, resulting in additional information about anatomy, morphology or physiology of the human body. Radiocontrast agents (also called photon-based imaging agents) are used to improve the visibility of internal body structures in x-ray and CT procedures. Contrast agents are also used to increase the contrast between different tissues in MRI (magnetic resonance imaging) and ultrasound imaging. The ideal imaging agent provides enhanced contrast with little biological interaction.
First investigations with radiopaque materials are done shortly after the discovery of x-rays. These positive contrast agents attenuate x-rays more than body soft tissues due to their high atomic weight. Iodine and barium have been identified as suitable materials with high radiodensity and are used until today in x-ray and CT contrast agents. Iodine-based contrast agents are water-soluble and the solutions are used nearly anywhere in the body. Iodinated contrast materials are most administered intravenous, but can also be introduced intraarterial, intrathecal, oral, rectal, intravesical, or installed in body cavities. Barium sulfate is only used for opacification of the gastrointestinal tract. Negative contrast agents attenuate x-rays less than body soft tissues, for example gas.

Iodinated contrast media are differentiated in;

Intravascular iodinated contrast agents are required for a large number of x-ray and CT studies to enhance vessels and organs dependent on the blood supply. Injectable contrast agents are diluted in the bloodstream and rapidly distributed throughout the extracellular fluid. The main route of excretion is through the kidneys, related to the poor binding of the agent to serum albumin. The liver (gall bladder) and small intestine provide alternate routes of elimination particularly in patients with severe renal impairment. The use of special biliary contrast agents is suitable for gallbladder CT and cholecystograms because they are concentrated by the liver to be detectable in the hepatic bile.
The introduction of fast multi-detector row CT technology, has led to the development of optimized contrast injection techniques. The amount of contrast enhancement depends on the contrast agent characteristics, such as iodine concentration, osmolality, viscosity, and the injection protocol, such as iodine flux and iodine dose. Adverse reactions are rare and have decreased with the introduction of nonionic contrast agents.
See also Contrast Enhanced Computed Tomography, Abdomen CT, Contrast Media Injector, Single-Head CT Power Injector, Multi-Head Contrast Media Injector, Syringeless CT Power Injector, CT Power Injector.

Contrast media injectors are part of the medical equipment used to deliver fluids in examinations such as CT, MRI, fluoroscopy and angiography. Many of these diagnostic imaging procedures include the administration of intravenous contrast agents to enhance the blood and perfusion in tissues.

Mainly there are two types of injector technology:
See also Single-Head Contrast Media Injector, Dual-Head CT Power Injector, Syringeless CT Power Injector.

The use of x-ray contrast agents in computed tomography (CT) began with a hand injection by the radiologist in the scan room. During its history, CT scanners have made great improvements in speed and image quality. Actual CT systems with multiple detectors allow scan times of a few seconds per body region. Some CT protocols require multiphase scans, where a body region is imaged with a single bolus of contrast in different blood flow phases. Automatic power (pressure) contrast media injectors are required to provide precise control of flow rate, volume and timing of injection. The use of a saline bolus following contrast administration reduces the volume of contrast required.

Most relevant topics for the use of a power injector in medical imaging procedures such as contrast enhanced computed tomography (CECT):
Must have basic injector control options:
Examples of other injector control options:

Conventional (also called analog, plain-film or projectional) radiography is a fundamental diagnostic imaging tool in the detection and diagnosis of diseases. X-rays reveal differences in tissue structures using attenuation or absorption of x-ray photons by materials with high density (like calcium-rich bones).
Basically, a projection or conventional radiograph shows differences between bones, air and sometimes fat, which makes it particularly useful to asses bone conditions and chest pathologies. Low natural contrast between adjacent structures of similar radiographic density requires the use of contrast media to enhance the contrast.
In conventional radiography, the patient is placed between an x-ray tube and a film or detector, sensitive for x-rays. The choice of film and intensifying screen (which indirectly exposes the film) influence the contrast resolution and spatial resolution. Chemicals are needed to process the film and are often the source of errors and retakes. The result is a fixed image that is difficult to manipulate after radiation exposure. The images may be also visualized on fluoroscopic screens, movies or computer monitors.
X-rays emerge as a diverging conical beam from the focal spot of the x-ray tube. For this reason, the radiographic projection produces a variable degree of distortion. This effect decreases with increased source to object distance relative to the object to film distance, and by using a collimator, which let through parallel x-rays only.
Conventional radiography has the disadvantage of a lower contrast resolution. Compared with computed tomography (CT) and magnetic resonance imaging (MRI), it has the advantage of a higher spatial resolution, is inexpensive, easy to use, and widely available. Conventional radiography can give high quality results if the technique selected is proper and adequate. X-ray systems and radioactive isotopes such as Iridium-192 and Cobalt-60 for generating penetrating radiation, are also used in non-destructive testing.

See also Computed Radiography and Digital Radiography.

A differential equation expresses a relationship between functions and their derivatives. In MRI, the Bloch equation for example is based on this mathematical function.

The digital mammography is an electronic imaging procedure of the breast. The number of breast imaging facilities equipped with digital mammography (also called computed radiography mammogram (CRM), CR mammogram) is growing due to a number of advantages.
Digital images can be stored directly in a picture archiving and communication system (PACS) and allows the printing, enhancement, magnification, or brightness and contrast manipulation for further evaluation. The sensitivity of digital mammography compared to film mammography is better in women with dense breasts, a population at higher risk for breast cancer, due to these post processing possibilities.
'The American College of Radiology's (ACR) Imaging Network found that digital mammography detected up to 28 percent more cancers than film-screen mammography in women age 50 and younger, premenopausal and perimenopausal women, and women with dense breasts, as reported in October 2005 in the New England Journal of Medicine.'

Advantages of digital mammography:
Existing mammography equipment can be converted to 'digital' operation, which allows cost savings compared to integrated digital mammography systems.

See also Breast MRI.