In nuclear medicine a hot spot describes a strong activity enrichment in one or more ranges of the organ or body part which is examined.
A pinhole collimator may be used if images of a hot spot and the surrounding with very high resolution are necessary. Zoom magnification or a converging collimator also may be used to improve resolution and assign the hot spot.

A bone scan or bone scintigraphy is used to in evaluate diseases of the skeletal system. Scintigraphic whole body bone imaging is a highly sensitive method to show changes in bone metabolism. Increased metabolic activity is seen as a hot spot.
The study requires the injection of a 99mTc-labeled radiopharmaceutical (most commonly methylene diphosphonate (MDP), hydroxymethylene diphosphonate (HMDP) or hydroxyethylene diphosphonate (HDP)). The activity administered for bone scanning is around 500 MBq (300-1100 MBq, 8-30 mCi), depending on age and weight of the patient. After 2-5 hours, the emitted gamma rays are detected by gamma cameras. The produced planar images include anterior and posterior views of the skeleton.
Multiphase bone scintigraphy is used to differentiate a bone process from tissue pathology. In some cases additional SPECT imaging is helpful to better characterize the presence, location and extent of disease.

Thermography is a method for example used in breast imaging. Thermography measures the body heat at the skin surface to identify hot spots caused by inflammation or cancer.

Conventional (also called analog, plain-film or projectional) radiography is a fundamental diagnostic imaging tool in the detection and diagnosis of diseases. X-rays reveal differences in tissue structures using attenuation or absorption of x-ray photons by materials with high density (like calcium-rich bones).
Basically, a projection or conventional radiograph shows differences between bones, air and sometimes fat, which makes it particularly useful to asses bone conditions and chest pathologies. Low natural contrast between adjacent structures of similar radiographic density requires the use of contrast media to enhance the contrast.
In conventional radiography, the patient is placed between an x-ray tube and a film or detector, sensitive for x-rays. The choice of film and intensifying screen (which indirectly exposes the film) influence the contrast resolution and spatial resolution. Chemicals are needed to process the film and are often the source of errors and retakes. The result is a fixed image that is difficult to manipulate after radiation exposure. The images may be also visualized on fluoroscopic screens, movies or computer monitors.
X-rays emerge as a diverging conical beam from the focal spot of the x-ray tube. For this reason, the radiographic projection produces a variable degree of distortion. This effect decreases with increased source to object distance relative to the object to film distance, and by using a collimator, which let through parallel x-rays only.
Conventional radiography has the disadvantage of a lower contrast resolution. Compared with computed tomography (CT) and magnetic resonance imaging (MRI), it has the advantage of a higher spatial resolution, is inexpensive, easy to use, and widely available. Conventional radiography can give high quality results if the technique selected is proper and adequate. X-ray systems and radioactive isotopes such as Iridium-192 and Cobalt-60 for generating penetrating radiation, are also used in non-destructive testing.

See also Computed Radiography and Digital Radiography.