(CTE) Computed tomography enterography is an imaging procedure to evaluate diseases affecting the mucosa and bowel wall of the small intestine. CTE uses oral contrast agents to improve bowel wall visualization. Several studies established that small bowel distention using negative oral contrast agent increases diagnostic performance of some abdomen CT studies.
The multi-detector row CT (MDCT) improves temporal and spatial resolution and 3D imaging processes offer a full examination of the small bowel with surrounding structures, depicting the small bowel inflammation associated with Crohn's disease by displaying mural hyperenhancement, stratification, and thickening.
CT enterography versus capsule endoscopy provides a non invasive study with comparable sensitivity, high specificity and overall accuracy.

See also Colonoscopy and Virtual Colonoscopy.

Contrast media injectors are part of the medical equipment used to deliver fluids in examinations such as CT, MRI, fluoroscopy and angiography. Many of these diagnostic imaging procedures include the administration of intravenous contrast agents to enhance the blood and perfusion in tissues.

Mainly there are two types of injector technology:
See also Single-Head Contrast Media Injector, Dual-Head CT Power Injector, Syringeless CT Power Injector.

The use of x-ray contrast agents in computed tomography (CT) began with a hand injection by the radiologist in the scan room. During its history, CT scanners have made great improvements in speed and image quality. Actual CT systems with multiple detectors allow scan times of a few seconds per body region. Some CT protocols require multiphase scans, where a body region is imaged with a single bolus of contrast in different blood flow phases. Automatic power (pressure) contrast media injectors are required to provide precise control of flow rate, volume and timing of injection. The use of a saline bolus following contrast administration reduces the volume of contrast required.

Most relevant topics for the use of a power injector in medical imaging procedures such as contrast enhanced computed tomography (CECT):
Must have basic injector control options:
Examples of other injector control options:

Diaphanography is a noninvasive breast imaging technique used in diagnosis of breast disease. The breast is illuminated with low intensity light and the transmission pattern of red and near-infrared radiation is detected. After amplification and reconstruction, the images are displayed on a monitor.
Results from diaphanography tend to show lower sensitivities and specificities than are found in diagnostic mammography studies. Light scanning (diaphanography and transillumination) is not recommended for screening or diagnostic evaluation of the breast.

Digital systems use discrete numerical values or non-numeric symbols for input, processing, transmission, storage, or display rather than being composed of variable voltage, acoustic field or electromagnetic field.

When invented, a fluoroscopic system consisted of x-ray tube, fluorescent screen and x-ray table. In 1950's, the development of the image intensifier revolutionized fluoroscopes. The basic components are extended by a gantry, image intensifier, camera, film and monitor system. The x-ray tube is usually located under the patient table, in opposition to the image intensifier and film cassette or display unit. The patient table can be rotated to an upright position for certain examinations and can be lowered to horizontal position for other imaging procedures. In some instances, the unit can be operated from outside the room.
Today, the transition from conventional to digital fluoroscopy replaces the image intensifier. A flat-panel detector in combination with sensitive image sensors and digital image processing improves the diagnostic ability of a modern system.