The brightness is the balance of light and dark shades in a displayed image. High brightness (also called density or intensity) settings produce bright images and low settings produce dark images. The contrast determines how many gray levels are displayed and the density determines the intensity.

(CR) Computed radiography is an imaging technique that uses similar equipment to conventional radiography except that films are replaced by imaging plates. An imaging plate contains photostimulable storage phosphors, which store the radiation level received at each point in local electron energies. The imaging plate is placed under the patient in the same way as conventional film cassettes. After x-ray exposure, the imaging plate is run through a special scanner to read out the image. The digital image can then be processed to optimize contrast, brightness, and zoom. Computed Radiography can be seen as halfway between film-based conventional technology and current direct digital radiography.

Contrast is the relative difference of intensities in two adjacent regions of an image. When referring to computed tomography (CT), contrast is defined as a difference in Hounsfield units between structures. The measurement of contrast resolution in CT imaging involves determining how easy it is to differentiate tissues whose CT density is similar to that of their surroundings. An image lacks contrast when there are no sharp differences between black and white. Brightness refers to the overall lightness or darkness of an image.
The contrast between air, soft tissue, and bones in x-ray and CT images is based on their different absorption of x-rays. Differences in tissue density, thickness and changes of the x-ray spectrum have consequences for image contrast, image noise as well as patient dose.
Optimized tube current, collimation, pitch and image reconstruction improves the contrast. Higher image contrast is produced by increased slice thickness, smaller matrix, and large field of view which results in large voxel size; high mAs to reduce noise; low pass filter.

See also Contrast Enhanced Computed Tomography.

The digital mammography is an electronic imaging procedure of the breast. The number of breast imaging facilities equipped with digital mammography (also called computed radiography mammogram (CRM), CR mammogram) is growing due to a number of advantages.
Digital images can be stored directly in a picture archiving and communication system (PACS) and allows the printing, enhancement, magnification, or brightness and contrast manipulation for further evaluation. The sensitivity of digital mammography compared to film mammography is better in women with dense breasts, a population at higher risk for breast cancer, due to these post processing possibilities.
'The American College of Radiology's (ACR) Imaging Network found that digital mammography detected up to 28 percent more cancers than film-screen mammography in women age 50 and younger, premenopausal and perimenopausal women, and women with dense breasts, as reported in October 2005 in the New England Journal of Medicine.'

Advantages of digital mammography:
Existing mammography equipment can be converted to 'digital' operation, which allows cost savings compared to integrated digital mammography systems.

See also Breast MRI.

(DR) Digital radiography uses a special electronic x-ray detector, which converts the radiographic image into a digital picture for review on a computer monitor. The digital image is then stored and can be post processed by changing the magnification, orientation, brightness, and contrast. Digital radiography (also called direct radiography) is a progressive development of computed radiography (CR).
These advantages can lead to fewer 'recalls' (repeated x-ray images) including a lower radiation dose than analog or conventional radiography. DR and CR systems use no chemicals to process the x-ray images and the hazardous materials and waste associated with film development are eliminated.

Advantages of digital radiography compared with conventional radiography: